CROWN XLS 802D Power Amplifier

1,050W/ch @ 2 ohms, 800W/ch @ 4 ohms, 500W/ch @ 8 ohms, 2,100W bridged mono @ 4 ohms, 1,600W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.

Specifications:

Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25

Frequency Response (at 1 watt, 22 Hz - 20 kHz): +0 dB, –1 dB

Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated)

A-weighted, below rated power: > 100 dB

No weighting, below rated power: > 95 dB

Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz: < 0.5%

Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB: < 0.3%

Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200

Crosstalk (below rated power)

at 1 kHz: –75 dB

at 20 kHz: –50 dB

Input Impedance (nominal) (balanced, unbalanced): 20 kilohms, 10 kilohms

Load impedance

Stereo: 4-8 ohms

Bridge mono: 8 ohms

AC Line Voltage and Frequency Configurations Available (± 10%):

120 VAC 60 Hz

100 VAC 50/60 Hz

220 VAC 50 Hz

230-240 VAC 50 Hz

Ventilation: Flow-through ventilation from front to back

Cooling: Internal heat sinks with forced-air cooling

Air Volume Requirements (per minute per unit): 80.15 ft3 (2.27 m3)

Dimensions: Width, Height, Depth EIA Standard19"W (EIA RS-310-B)

x 3.5” (8.9 cm) H x15.2" (38.6cm) D